Shopsmith Mark V Home Workshop System
Item Details
A Shopsmith Mark V Home Workshop System includes a table saw, disc sander, wood lathe, jig saw, drum sander, drill press and horizontal borer, magna dado, band saw, jointer, saw joint, and router. The Mark V comes with a binder-manual and a video so you get the most out of your machine. This home workshop has a lot of fabulous extras including a quill feed, #50553 Moulder head, the Pro Fence and Table System Upgrade Kit which includes a larger table with 17.5’ X 22’ work surface got extra support for ripping and crosscutting longer and wider boards and pieces of wood; Pro Fence (24.5’ long x 2.5’ thick) with a double T-slot on the top surface and another T-slot on each side for attaching accessories, jigs, and fixtures plus a wider Fence Straddler; new Table Carriage with dual Tilt Locks and a widened tube stance; a Hand Wheel and Lock to move the table up and down; Direct-Reading Rip Fence Scales which includes two inter-changeable stainless steels scales that are graduated in both 1/16’ and 1/32’ increments; two floating extension tables; four 27’ connecting tubes; two telescoping legs to give added support in the middle or at the ends of the connecting tubes; see-through upper saw guard with etched in depth-of-cut indicators, European style riving knife, and anti-kickback device; lower saw guard updated to accommodate Shopsmith’s 12’ sanding disc with 2.5’ diameter dust collection port; saw table insert; anti-rotation tool rest post; and two-position lathe tool rest arm; special sanding disc hub.
- At time of cataloging, EBTH was able to determine this item turned on when plugged in. However, the item is otherwise untested and is being sold ‘as-is.’ Therefore, refunds based on its working condition will not be offered.
Dimensions
The above measurements are for the item as displayed.
Item #
14CIN170-033
